HP StorageWorks XP Remote Web Console user guide for the XP12000/XP10000 (December 2005)

Configuration File Loader 119
5-3-7 Configuring the Command Devices
The [LDEV] tag allows you to change the command device settings. You cannot add or delete command device
settings with the [LDEV] tag definitions.
When the command device (Cmd .Dev) is OFF, and the command device security (Cmd. Sec) is ON, an error
occurs.
You can set the command device OFF, regardless of the existence of the LU path.
Table 5-10 lists the values available for the [LDEV] tag.
Table 5-10 Available Configuration Values for the [LDEV] Tag
Column Item Available Value
1st, 11th (Index) CU # 00 - 3F. Set with hexadecimal numbers in one or two digits.
2nd, 12th (Index) LDEV # 00 - FF. Set with hexadecimal numbers in one or two digits.
3rd, 13th Cmd. Dev (Command Device) Enable or Disable (The default when the spreadsheet is
exported)
ON or OFF are also available as the set value when you
write the spreadsheet.
4th, 14th Cmd. Sec (Command Device Security) Enable or Disable (The default when the spreadsheet is
exported)
ON or OFF are also available as the set value when you
write the spreadsheet.
5th, 6th, 15th, 16th Blank