HP StorageWorks XP Remote Web Console user guide for the XP1024/XP128 (December 2005)

Configuration File Loader 88
5-3-6 Setting the LU Path
The [LUN] tag allows you to set the LU path definition and add, delete, or change LU paths.
Table 5-9 lists the items and values available for the [LUN] tag.
Table 5-9 Available Configuration Values for the [LUN] Tag
Column Item Available Values
1st, 8th (Index) Port One of the following can be set:
1A, 1B, 1C, 1D, 1E, 1F, 1G, 1H, 1J, 1K, 1L, 1M, 1N, 1P, 1Q, 1R,
2A, 2B, 2C, 2D, 2E, 2F, 2G, 2H, 2J, 2K, 2L, 2M, 2N, 2P, 2Q, 2R,
3A, 3B, 3C, 3D, 3E, 3F, 3G, 3H, 3J, 3K, 3L, 3M, 3N, 3P, 3Q, 3R,
4A, 4B, 4C, 4D, 4E, 4F, 4G, 4H, 4J, 4K, 4L, 4M, 4N, 4P, 4Q, 4R
2nd , 9th (Index) Group ID 00 - F. Use two-digit hexadecimal numbers.
3rd, 10th (Index) LUN # 00 -F F. Use two-digit hexadecimal numbers.
4th, 11th Control Unit (CU) # 00 -1 F. Use two-digit hexadecimal numbers.
5th, 12th LDEV # 00 - FF. Use two-digit hexadecimal numbers.
6th, 13th Blank
5-3-7 Configuring the Command Devices
The [LDEV] tag allows you to change the command device settings. You cannot add or delete command device
settings with the [LDEV] tag definitions.
NOTE: When the command device (Cmd .Dev) is OFF, and the command device security (Cmd. Sec) is ON,
an error occurs.
NOTE: You can set the command device OFF, regardless of the existence of the LU path.
Table 5-10 lists the values available for the [LDEV] tag.
Table 5-10 Available Configuration Values for the [LDEV] Tag
Column Item Available Value
1st, 8th (Index) CU # 00 - 1F. Set with hexadecimal numbers in two digits.
2nd, 9th (Index) LDEV # 00 - FF. Set with hexadecimal numbers in two digits.
3rd, 10th Cmd. Dev (Command Device) ON or OFF
4th, 11th Cmd. Sec (Command Device Security) ON or OFF
5th, 6th, 12th, 13th Blank