HP StorageWorks XP Remote Web Console user guide for the XP1024/XP128 (December 2005)

Configuration File Loader 85
5-3-2 Setting the CHA Mode
The [CHA] tag allows you to set the channel adapter mode. The [CHA] tag is available only for changing
settings. You cannot add or delete the settings with the [CHA] tag definitions. Mainframe settings are not written
on the downloaded spreadsheet.
Table 5-4 lists the available configuration definitions for the [CHA] tag.
Table 5-4 Available Configuration Values for the [CHA] Tag
Column Item Available Values
1st, 8th (Index) CHA The available values are different between the MC subsystem and the SC subsystem. One
of the following can be set:
• For MC subsystem: CHA-1P, CHA-1Q, CHA-1R, CHA-1S, CHA-2V, CHA-2W,
CHA-2X, CHA-2Y
• For SC subsystem: CHA-1C, CHA-1D, CHA-1F, CHA-2G, CHA-2J, CHA-2K
2nd, 9th PCB Mode One of the following can be set:
• Standard: Standard mode
• High Speed: High Speed mode
• High Speed 2: High Speed (2 port) mode
3rd-6th, 10th-13th Blank