HP StorageWorks XP Remote Web Console user guide for the XP1024/XP128 (December 2005)
Configuration File Loader 84
5-3 LUN Manager Spreadsheet Settings
The following LUN Manager functions can be defined by using Configuration File Loader:
• Channel Adapter (CHA) settings allow you to change the PCB mode. See section 5-3-2.
• Port Settings allow you to change the settings for arbitrated loop-physical address (AL-PA), data transfer
speed (host speed), and topology. You can also change the Secure Manager XP setting. See section 5-3-3.
• Host Group Settings allow you to create, delete, or change the host group. See section 5-3-4.
• WWN settings allow you to add, delete or change the WWN information. See section 5-3-5.
• LU path settings allow you to add, delete, or change LU paths. See section 5-3-6.
• Command Device settings and set or release the command device and command device security. See
section 5-3-7.
5-3-1 Column Format
The LUN Manager spreadsheet allows you to write the settings for CHA mode, port, host group, WWN, path
definition, and command devices. The format of the LUN Manager spreadsheet is as follows:
• 1st column to 6th column: Current settings area
• 7th column: Blank column
• 8th column to 13th column: New settings area
The number of columns used depends on the function tag. If a particular function tag requires less than six
columns, the unused columns are left blank.
Table 5-3 describes the format of the LUN Manager spreadsheet.
Table 5-3 LUN Manager Spreadsheet Format
Function Tag Column
[CHA] [Port] [HostGroup] [WWN] [LUN] [LDEV]
1st Port CHA Port Port Port CU
2nd Security Switch PCB Mode Group ID Group ID Group ID LDEV
3rd AL-PA Name WWN LUN Command Device
4th Fabric Host mode Name CU Command Device Security
5th Connection LDEV
6th Channel speed
Blank
Blank Blank
Blank
Blank
7th Blank
8th Port Port Port Port Port CU
9th Security Switch PCB Mode Group ID Group ID Group ID LDEV
10th AL-PA Name WWN LUN Command Device
11th Fabric Host mode Name CU Command Device Security
12th Connection LDEV
13th Channel speed
Blank
Blank Blank
Blank
Blank
NOTE: When the LUN Manager spreadsheet is exported, the settings are written up to the 7th column (blank
column).
LUN Manager spreadsheets must conform to those parameters.