HP StorageWorks XP Remote Web Console user guide for the XP1024/XP128 (December 2005)

Performing XP Remote Web Console Operations 39
Figure 3-4 Device Information Box and Device View
• Device Information: Product name of the connected subsystem
• Serial Number: Serial number of the connected subsystem
• IP Address: IP address of the connected subsystem (SVP)
• Device Name: Device name of the connected subsystem. This can be changed if you are in Modify mode.
This is a required field (maximum 255 alphanumeric characters).
NOTE: Do not add a space before or after the device name, or you will cause an error when you click
Apply.
NOTE: The device name is required to use the SNMP Agent. Make sure to document the device name
because the settings are cleared if the SVP is replaced.
• Contact: Device support contact information, such as personnel and telephone number, where you can
inquire about the connected subsystem. You can change the contact information with the Modify mode. This
is a required field (maximum 255 alphanumeric characters).
NOTE: The contact name is required to use SNMP Agent. Make sure to document the contact name
because the settings are cleared if the SVP is replaced.
• Device Location: Location of the connected subsystem. The XP Remote Web Console user can change the
device location when in Modify mode. This is a required field (maximum 255 alphanumeric characters).
NOTE: The device location is required to use SNMP Agent. Make sure to document the contact name
because the settings are cleared if the SVP is replaced.
• Firmware Version Main: Version of the microcode installed in the connected subsystem
• Firmware Version SVP: Version of the XP Remote Web Console Java™ applet program installed in the SVP
of the connected subsystem
• Firmware Version Server: Version of the RMI™ server installed in the SVP of the connected subsystem
• Device View: Product name and visual image (picture) of the connected subsystem