HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 24 Error Codes — Part Code 0610 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0iCheck the SSID.No SSID can be specified.590650610
0iTo continue processing, select
[OK]. To stop processing,
select [Cancel].
Do you want to specify a CU
without restrictions on SLPRs?
590660610
0WSelect [OK].The volume has been
mapped as a mainframe
volume by the Add LU
operation. The settings of the
volume made at the external
subsystem side are carried
over. Restore the volume
before using it.
591070610
Table 25 Error Codes — Part Code 0710
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0WSet a different value for the
IP address and the port
number.
The value of the IP address
and the port number of the
primary syslog server are the
same as the ones of the
secondary syslog server.
555960710
0WSelect [OK].Write down the IP address,
the port number, and the
location identification name
which you have set in the
Syslog window, because you
may need to set those items
in the Syslog window again.
593190710
Table 26 Error Codes — Part Code 1005
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
6ESelect another volume.The specified volume cannot
be set as a command device
or a component of a LUSE
volume, because it is being
used as an XP Continuous
Access, XP Business Copy, XP
Flex Copy, XP Auto LUN, or
XP Snapshot volume. Select
another volume.
10021005
6EThe Configuration information
has been already changed.
Check the settings and
request the setting of the
configuration information
again.
You are trying to set multiple
paths to the same volume
from one group.
10031005
XP Remote Web Console Error Codes 99