HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 24 Error Codes — Part Code 0610 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0iCheck the volume.No S-VOL can be assigned
to the P-VOL.
590440610
0iTo continue the operation,
select the OK button.
The P-VOL and the S-VOL
belong to different SLPRs. Do
you want to continue this
operation?
590480610
5EThe licensed capacity for a
program product will become
insufficient because of a
configuration change.
Add licensed capacity from
the License Key window.
If you do not add licensed
capacity in 10 days, the
program product will be
unavailable.
The licensed capacity for a
program product will become
insufficient because of a
configuration change.
Add licensed capacity from
the License Key window.
If you do not add licensed
capacity in 10 days, the
program product will be
unavailable.
590550610
0WSelect [OK] to continue
processing, or select [Cancel]
to stop processing.
Stop any application that is
using the command device
(for example, RAID
Manager.)
Do you want to continue this
operation?
590560610
5WCorrect the licensed capacity
with the License Key Partition
Definition window.
The licensed capacity was
exceeded because of
changing the configuration.
Correct the licensed capacity
on the License Key Partition
Definition window.
590570610
0iTo continue processing, select
[OK]. Otherwise, select
[Cancel].
Do you want to specify an
SSID without restrictions on
SLPRs?
590580610
0iDelete the row containing the
error from Preset, and then
make settings again.
No connected path was
secured.
590590610
0iCheck the setting range, and
enter a correct numerical
value.
The entered numerical value
is outside the setting range.
590600610
0iSpecify fewer alternate paths,
and then retry the operation.
Failed to have the number of
paths the same as the number
of the specified alternate
paths.
590610610
0iCheck the status of the
connected path, and then
retry the operation.
Failed to assign a normal
path.
590620610
0iDefine a path from a new
port to the external volume,
and then retry the operation.
The number of paths
registered in the port reached
the maximum.
590630610
0iCheck the details on the 610
xxxxx error, and then delete
the row containing the 610
xxxxx error.
A 610 xxxxx error exists in
Preset. Delete the row
containing the 610 xxxxx
error, and then select the
Apply button.
590640610
98 HP StorageWorks XP Remote Web Console for Storage System Messages and Error Codes