HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 22 Error Codes — Part Code 0605 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5EExecute Check Path & Restore
Volume instead of Disconnect
paths or Check paths.
After Disconnect Subsystem
or Disconnect Volume is
executed, neither Disconnect
Paths nor Check paths can
be executed.
583300605
5EIf this problem persists, call
technical support.
The path requested by
Disconnect paths or Check
paths was not found.
583310605
5EEnsure that the external
volume is not blocked, and
then retry the operation.
The external volume is
blocked.
583320605
5ERelease the XP Continuous
Access Journal or Hitachi
Universal Replicator for z/OS
pair, and then retry the
operation.
The Delete LU operation
cannot be performed to the
volume being used by XP
Continuous Access Journal or
Hitachi Universal Replicator
for z/OS.
584060605
5ERelease the journal volume of
the XP Continuous Access
Journal, and then retry the
operation.
The Delete LU operation
cannot be performed to the
journal volume of XP
Continuous Access Journal.
584070605
5ERetry the operation after the
Cache Cleanup of the
external volume completes
successfully.
If Cache Cleanup fails, call
technical support.
Disconnect Subsystem or
Disconnect Volume cannot be
performed, because the status
of the specified external
volume is Cache Cleanup.
584080605
5EPut the external volume in
normal status by executing
Check Path & Restore
Volume, and then retry the
operation.
The cache mode cannot be
changed when Disconnect
Subsystem or Disconnect
Volume is in progress.
584090605
5EConfirm the setting of the
bind mode by XP Cache LUN
Software.
The cache mode cannot be
changed because bind mode
is set to the specified volume.
584100605
5EThe cache modes of the
volumes which compose the
LUSE volume are different.
Set the same cache mode to
the volumes which compose
the LUSE volume.
The cache modes of the
volumes which compose the
LUSE volume are different.
Set the same cache mode to
the volumes which compose
the LUSE volume.
584110605
0WIf the problem persists despite
retrying, call technical
support.
The storage system is in
internal process. Retry the
operation.
584510605
5EThe currently licensed
capacity is insufficient. To
increase the licensed
capacity, buy a new license
key.
The command was rejected,
because the licensed capacity
of XP LUN Security Extension
Software was exceeded.
584530605
5WRelease the XP Snapshot pair
or select another volume.
The operation cannot be
performed, because the
specified P-VOL is a P-VOL
for XP Snapshot.
584760605
XP Remote Web Console Error Codes 93