HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 22 Error Codes — Part Code 0605 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5ERelease the reserved volume
setting of XP Auto LUN, and
then retry the operation.
The reserved volume setting
of XP Auto LUN is defined.
Release the reserved volume
setting of XP Auto LUN, and
then retry the operation.
565200605
5EIncrease the licensed
capacity for the program
products that do not have
sufficient licensed capacity,
and then retry the operation.
The licensed capacity of
some program products will
be insufficient because of the
Add Volume operation.
565210605
3ESelect another window. To
set this function, contact the
storage administrator.
This function cannot be used
by the storage partition
administrator.
565240605
5WCorrect the licensed capacity
with the License Key Partition
Definition window.
The licensed capacity was
exceeded because of
changing the configuration.
Correct the licensed capacity
on the License Key Partition
Definition window.
565360605
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
571010605
5ECheck the DKCMAIN
microcode version and the
SVP microcode version,
because these versions might
be mismatched.
This function is not supported.582460605
5ECheck the setting of the
volume, and specify a volume
without the VMA setting.
VMA is set to the specified
P-VOL.
582470605
5ECheck the setting of the
volume, and specify a volume
without the VMA setting.
VMA is set to the specified
S-VOL.
582480605
5WRecheck the specified volume.
If the specified volume is
correct, stop the NAS cluster
service, shut down the NAS
OS, and then retry the
operation.
The specified volume is being
used as a NAS user volume.
582490605
5ECreate an XP Flex Copy pair
using an external volume and
an internal volume.
The P-VOL and the S-VOL of
the XP Flex Copy pair are
both internal volumes.
582510605
5ESpecify an external volume
whose IO Suppression mode
is set to Enable.
An internal volume and an
external volume whose IO
Suppression mode is set to
Disable are specified as the
P-VOL and the S-VOL of the
XP Flex Copy pair.
582520605
XP Remote Web Console Error Codes 91