HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 22 Error Codes — Part Code 0605 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5ECheck the contents of the XP
External Storage Software
spreadsheet.
The SSID value is not set.553850605
5ECheck the contents of the XP
External Storage Software
spreadsheet.
The number of paths
registered for a port has
reached the maximum.
553860605
5ECheck the contents of the XP
External Storage Software
spreadsheet.
A CU number that cannot be
used by the subsystem was
specified.
553870605
5ERe-install the program
product.
The program product has not
been installed.
553880605
5ECheck the contents of the XP
External Storage Software
spreadsheet.
The specified external path
does not exist.
553890605
5ECheck the contents of the XP
External Storage Software
spreadsheet.
There is an error in the
method for specifying the
SSID.
553900605
5ECheck the contents of the XP
External Storage Software
spreadsheet.
An unsupported device was
specified.
553910605
5ECheck the contents of the XP
External Storage Software
spreadsheet.
The specified SSID value is
already being used.
553920605
5ECheck the contents of the XP
External Storage Software
spreadsheet.
There is an error in the path
settings.
553930605
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
563010605
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
563020605
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
563030605
5EThe licensed capacity for a
program product will become
insufficient because of a
configuration change.
Add licensed capacity from
the License Key window.
If you do not add licensed
capacity in 10 days, the
program product will be
unavailable.
The licensed capacity for a
program product will become
insufficient because of a
configuration change.
Add licensed capacity from
the License Key window.
If you do not add licensed
capacity in 10 days, the
program product will be
unavailable.
565070605
XP Remote Web Console Error Codes 89