HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 22 Error Codes — Part Code 0605 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5WCheck the contents, and retry.The M-VOL Suspend
command was issued to a
secondary boot device.
85100605
5WDisconnect the R-VOL from
the host, or delete the XP
Continuous Access path.
You cannot reserve the
volume, because a path
group is set.
85110605
5WDisconnect the R-VOL from
the host, or delete the XP
Continuous Access path.
You cannot perform the
Resync or Suspend operation,
because a path group is set.
85120605
5WChange the specified P-VOL
to the other volume, or stop
using the P-VOL from the host
or XP Continuous Access, and
then retry the operation.
The command was rejected.
The specified P-VOL is being
used from the host or by XP
Continuous Access.
85130605
5WDelete the Reserve volume.No reserved volume can be
allocated.
85140605
5WCheck the contents, and retry.The capacity of the reserved
volume exceeds the
maximum.
85150605
5WCheck the capacity of the
volume.
The capacity of the P-VOL
exceeds the maximum.
85160605
5WCheck the capacity of the
volume.
The capacity of the S-VOL
exceeds the maximum.
85170605
5WCheck the emulation type.You cannot create a pair,
because the track format is
different for each. Make sure
that the specified emulation
type is the same for both.
85180605
5WCheck the volume capacity.The specified volumes cannot
be paired because they differ
in capacity.
85190605
3ESpecify the volume of the
same emulation type, and
retry the operation.
You cannot set a pair,
because the volume type is
different for each.
85200605
5WCheck the contents, and retry.The number of multiple copy
jobs exceeded the maximum.
85210605
5WSpecify the emulation type
supported in XP Flex Copy.
The emulation type of the
P-VOL is not supported.
85220605
5WSpecify the emulation type
supported in XP Flex Copy.
The emulation type of S-VOL
is not supported.
85230605
5WSpecify the emulation type
supported in XP Flex Copy.
The emulation type is not
supported.
85240605
5WIf the problem persists, call
technical support.
An internal logic error
occurred.
85250605
5WIf the problem persists, call
technical support.
An internal logic error
occurred.
85260605
5WIf the problem persists, call
technical support.
An internal logic error
occurred.
85270605
XP Remote Web Console Error Codes 83