HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 22 Error Codes — Part Code 0605 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
3EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
65330605
5EDecrease the number of
external volumes and retry
the configuration operation.
The number of external
volumes that can be set to the
subsystem exceeds the
maximum.
65340605
5EDelete a logical path, and
then make configuration
changes.
You cannot make changes
because a logical path to the
volume still remains.
65350605
5ERelease the LUSE volume,
and then request
configuration changes again.
The target volume cannot be
changed due to its LUSE
configuration.
65360605
0WThere is no error in this
setting. However, there is an
error in another setting in the
Preset list. Remove the
factor(s) that caused the
error, and then retry the
operation.
There is no error in this
setting.
65370605
5EIf this problem persists, call
technical support.
This error code is not
registered.
73100605
3ERetry the operation. If this
problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
80000605
3ERetry the operation. If this
problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
80010605
3ERetry the operation. If this
problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
80020605
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
81000605
3ECheck the DKCMAIN
microcode version and the
SVP microcode version
because these versions might
be mismatched.
This function is not supported.81020605
5EWait for a while, and then
retry the operation.
This logical volume is busy.81220605
5EThe currently licensed
capacity is insufficient. To
increase the licensed
capacity, buy a new license
key.
The command was rejected,
because the licensed capacity
was exceeded.
81360605
XP Remote Web Console Error Codes 81