HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 22 Error Codes — Part Code 0605 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
50990605
5WInstall the program product.The program product is not
installed.
55110605
0iCorrect the settings, and retry
the operation.
You cannot create a pair
because the specified volume
is used as a NAS system
volume.
56240605
5WThe number of pairs is
decreased, and retry the
operation.
You cannot create another
pair, because the number of
pairs in the group exceeds
the maximum.
56250605
5WChange the Volume Retention
Manager setting.
The specified volume cannot
be used because the write
protection is set by Volume
Retention Manager.
56260605
0iCheck the volume.This operation has been
rejected. The XP LUN Security
Extension Software setting
does not allow the specified
volume(s) to be specified as
S-VOL(s.)
58210605
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
58270605
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
58280605
3EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
60120605
3EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
60220605
3EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
60230605
5WWait for a while, and retry
the operation.
Processing in progress. Wait
for a while, and then retry the
operation.
65020605
5WWait for a while, and retry
the operation.
The target volume status is
being changed to SMPL.
65030605
80 HP StorageWorks XP Remote Web Console for Storage System Messages and Error Codes