HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)
Table 22 Error Codes — Part Code 0605 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
3WIf the Concurrent Copy or the
Hitachi Extended Remote
Copy for Mainframe
operation is in progress in the
target volumes, cancel the
Concurrent Copy job or
delete a Hitachi Extended
Remote Copy for Mainframe
pair via the host. If the
Concurrent Copy or the
Hitachi Extended Remote
Copy for Mainframe
operation is not in progress
in the target volumes, issue
the LISTSESS, and LISTDVCS
commands, check the
SESSION ID No., and
terminate SESSION by means
of the TERMSESS command.
The Concurrent Copy or the
Hitachi Extended Remote
Copy for Mainframe
operation is in progress in the
target volumes.
Cancel the Concurrent Copy
job or delete a Hitachi
Extended Remote Copy for
Mainframe pair via the host.
22000605
3WCorrect settings, and then
retry.
Processing cannot be
performed because of XP
LUN Security Extension
Software settings.
22010605
5ECheck the setting, and then
retry the operation.
The specified volume cannot
be processed due to the
effect of the access attribute
assigned by Volume
Retention Manager. Check
the settings, and then retry
the operation.
22020605
5EProcessing cannot be
performed because of
Volume Security settings.
Processing cannot be
performed because of
Volume Security settings.
22030605
5EDelete the journal volumes to
be maintained and all the
pairs that are using these
journal volumes.
Journal volumes are included
in the external volumes to be
maintained. Delete the
journal volumes to be
maintained and all the pairs
that are using these journal
volumes.
22050605
5ERelease the pair definition or
delete command devices,
and then retry the operation.
One of the following is
defined: an XP Continuous
Access pair, an XP
Continuous Access Journal
Software pair, or a Hitachi
Universal Replicator for z/OS
pair.
Alternatively, command
devices defined by Business
Continuity Manager are
included.
Release the pair definition or
delete command devices
defined by Business
Continuity Manager, and
then retry the operation.
25150605
78 HP StorageWorks XP Remote Web Console for Storage System Messages and Error Codes