HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)
Table 10 Error Codes — Part Code 0110 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
2ELog off from XP Remote Web
Console. After that, log on to
XP Remote Web Console
again and check whether
configuration changes have
been made correctly.
If configuration changes have
been made correctly, there is
no problem.
If configuration changes have
been made incorrectly, retry
the operation.
An error occurred regarding
screen display. Log off from
XP Remote Web Console.
After that, log on to XP
Remote Web Console again
and check whether
configuration changes have
been made correctly.
570110110
1EIf this problem persists, call
technical support.
The configuration information
is incorrect. Call technical
support.
585800110
0WTo continue processing, select
[OK]. To stop processing,
select [Cancel].
Failed to change the mode to
Modify. Do you want to retry
the operation to change the
mode to Modify?
590020110
5iReply to the message.Succeeded to change the
mode to Modify.
590030110
0iTo refresh all the
configuration information,
select OK. If not, select
Cancel.
Do you want to refresh all the
configuration information?
591050110
Table 11 Error Codes — Part Code 0190
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
Input the nickname and retry.Enter the nickname.50010190
Input the product name and
retry.
Enter the product name.50020190
Input the serial number and
retry.
Enter the serial number.50030190
Input the serial number with
the numerical value and retry.
Enter a numerical value for
the serial number.
50040190
Input the IP address and retry.Enter the IP address.50050190
Input the IP address with the
numerical value and retry.
Enter numerical values for the
IP address.
50060190
Input the location name and
retry.
Enter the location name.50070190
Remove the invalid characters
and retry.
You cannot use the following
characters: " \ , ; : * ? < >
| /
50080190
Remove the multi-byte
characters and retry.
You cannot use multi-byte
characters.
50090190
None.This page can be accessed
by the administrator only.
50100190
XP Remote Web Console Error Codes 55