HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)
Table 89 Error Codes — Part Code 9607 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5EIf this problem persists, call
technical support.
A parameter error occurred.
If this problem persists, call
technical support.
71209607
5EIf this problem persists, call
technical support.
A parameter error occurred.
If this problem persists, call
technical support.
71219607
Table 90 Error Codes — Part Code 9610
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
2EIf this problem persists, call
technical support.
An error occurred during
processing. If this problem
persists, call technical
support.
70609610
3EIf this problem persists, call
technical support.
There is an invalid value in
the XP LUN Security Extension
Software information.
74429610
6WMount volumes, and then
retry the operation.
There is no valid volume.81129610
0iTo change the mode, select
[OK]. Otherwise, select
[Cancel].
Do you want to change the
expiration lock mode?
93629610
0iCorrect the retention term,
and then retry the operation.
The specified retention term
exceeds the maximum.
93639610
3EIf this problem persists, call
technical support.
There is an invalid value in
the Extent information.
584059610
0WTo set VMA, select [OK].
Otherwise, select [Cancel].
If you set VMA, all the data
or part of the data written in
the logical volume will be
deleted. Do you want to
continue the operation?
591069610
Table 91 Error Codes — Part Code 10010
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5WReply to the message.Zero cannot be specified to
all the fields or the ClassA
fields.
5501110010
5WReply to the message.The same IP address, user ID
and output folder are set to
the primary FTP server and
the secondary FTP server.
5563810010
5WReply to the message.Enter the user ID.5563910010
5WReply to the message.The server is not set. Input
and apply the required
setting, and retry the
operation.
5564010010
370 HP StorageWorks XP Remote Web Console for Storage System Messages and Error Codes