HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 88 Error Codes — Part Code 9605 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5ESee the XP LUN Security
Extension Software window
and check the following
about the logical volume you
have selected:
• The access attribute must
be Read/Write
• The logical volume must
be able to be specified as
an S-VOL
• You must be able to set a
path to the logical volume
by using either the RAID
Manager or XP Remote
Web Console
• No mode is set using the
RAID Manager
The access attribute of the
logical volume has already
been changed.
584369605
5ESelect a logical volume
without VMA.
VMA is set to the logical
volume.
584379605
5ECheck the logical volume
configuration, and then retry
the operation.
This logical volume is
configured as a command
device.
584389605
5ECheck the logical volume
configuration, and then retry
the operation.
This logical volume is a NAS
system volume.
584399605
5ECheck the logical volume
configuration, and then retry
the operation.
This logical volume is a NAS
user volume.
584409605
5ESelect a logical volume
whose emulation type is
OPEN-V.
The emulation type of the
logical volume is not
OPEN-V.
584429605
5ESpecify an open-system
volume.
The logical volume is a
mainframe volume.
584439605
5ERelease the pair state or set
up the VMA on another
logical volume.
A VMA cannot be set up on
this logical volume because
Continuous Access, XP
Business Copy, or XP
Continuous Access Journal is
using the logical volume.
584449605
5ERelease the XP Business Copy
pair, or set up the VMA on
another logical volume.
A VMA cannot be set up on
this logical volume because
XP Business Copy is using the
logical volume.
584459605
5ESelect other logical volumes
without VMA, or delete the
path of the specified logical
volume, and then retry the
operation.
The command was rejected,
because you tried to set VMA
to a logical volume with a
path set on.
584479605
5ERetry the operation after the
logical volume has recovered
from the blocked status or
after the LDEV has been
formatted or shredded.
The specified logical volume
is blocked, or the LDEV is
being formatted or shredded.
584489605
368 HP StorageWorks XP Remote Web Console for Storage System Messages and Error Codes