HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 88 Error Codes — Part Code 9605 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
584239605
5ERestore the logical volume.The specified logical volume
is blocked.
584249605
5ERelease the journal volume of
XP Continuous Access
Journal, or set up the VMA
on another logical volume.
A VMA cannot be set up on
this logical volume because
the logical volume is being
used as a journal volume of
XP Continuous Access
Journal.
584259605
5ESet the extent to another
logical volume.
Extents are already set to the
specified logical volume.
584269605
5ESet the VMA.VMA is not set to the
specified logical volume.
584279605
5ESet the extents.Extents are not set to the
specified logical volume.
584289605
5EMake the setting to another
logical volume.
A retention term is set to the
specified logical volume.
584299605
5ERelease the iSCSI setting or
set the VMA to another
logical volume.
VMA cannot be set to the
specified logical volume
because the volume is used
as a logical volume for iSCSI.
584309605
5ESet VMA on a different
logical volume.
A VMA cannot be set up on
this logical volume because
XP Flex Copy is using the
logical volume.
584319605
5ERelease XP Auto LUN's use of
the logical volume, or set up
the VMA on another logical
volume.
A VMA cannot be set up on
this logical volume because
XP Auto LUN is using the
logical volume.
584329605
5ERelease the access attribute
of the extent.
An access attribute is set to
the specified extent.
584339605
5ERetry a little later.This logical volume is busy.584349605
5ERetry a little later.This logical volume is busy.584359605
XP Remote Web Console Error Codes 367