HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 88 Error Codes — Part Code 9605 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5ECheck the DKCMAIN
microcode version and the
SVP microcode version,
because these versions might
be mismatched.
This function is not supported.81239605
5ESpecify an open-system
volume.
This logical volume is a
mainframe volume.
81249605
5EReview LDEV information,
and then retry.
The attribute of the logical
volume has been changed by
RAID Manager.
81259605
5ECheck the logical volume
configuration, and then retry
the operation.
This logical volume is
configured as a command
device.
81269605
5ECheck the logical volume
configuration, and then retry
the operation.
This logical volume is a NAS
system volume.
81279605
5EIf this problem persists, call
technical support.
A parameter error occurred.81289605
5ECheck the logical volume
configuration, and then retry
the operation.
This logical volume is a On
Demand volume.
81299605
5ECheck the logical volume
configuration, and then retry
the operation.
This logical volume is an XP
Flex Copy volume.
81309605
5ECheck the logical volume
configuration, and then retry
the operation.
This logical volume is a NAS
user volume.
81319605
5EIf this problem persists, call
technical support.
This error code is not
registered.
81329605
5ECheck the logical device
volume configuration, and
then retry the operation.
This logical volume is an
iSCSI volume.
81339605
5EYou cannot change the
attribute of this logical device
to Read/Write. Call technical
support To change the
attribute.
You cannot change the
attribute of this logical volume
to Read/Write. Call technical
support if you want to change
the attribute.
81349605
5ECheck the logical volume
configuration, and then retry
the operation.
This logical volume is already
used as an S-VOL for
Continuous Access or XP
Business Copy.
81359605
5EThe currently licensed
capacity is insufficient. To
increase the licensed
capacity, buy a new license
key.
The command was rejected,
because the licensed capacity
was exceeded.
81369605
5EThe Reserved setting of the
specified device cannot be
released. To release the
Reserved setting, call
technical support.
The Reserved setting of the
specified volume cannot be
released. To release the
Reserved setting, call
technical support.
81389605
364 HP StorageWorks XP Remote Web Console for Storage System Messages and Error Codes