HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 85 Error Codes — Part Code 9505 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
3EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
71119505
5EIf this problem persists, call
technical support.
This error code is not
registered.
73109505
6ESpecify the ports which are
the target of Serverless
Backup.
The specified ports are not
the target of Serverless
Backup or are not equipped.
74309505
5EIf you intend to change the
port type of the ports whose
fibre PCB mode is set to high
speed to the External, make
sure that you change the port
type of all the ports to the
External at the same time
when you set the fibre PCB
mode to high speed.
The port type of one or more
ports whose fibre PCB mode
is set to high speed is not
changed to the External. If
you intend to change the port
type of the ports whose fibre
PCB mode is high speed to
the External, make sure that
you change the port type of
all the ports to the External.
74319505
5EMake sure that all the
external ports whose fibre
PCB mode is set to high
speed have the same
parameter setting.
The fibre PCB mode is set to
high speed, but the
parameters of the external
ports are not the same.
74329505
3ERetry the operation. If you get
the same message again, call
technical support.
An error occurred while
connecting to the subsystem.
Retry a little later.
80019505
3ERetry a little later.A communication time-out
error occurred in the
subsystem. Wait for a while,
and then retry the operation.
80029505
3ECheck the DKCMAIN
microcode version and the
SVP microcode version,
because these versions might
be mismatched.
This function is not supported.81029505
5ESpecify CU group 0.The specified CU group is
invalid.
555829505
5ESpecify the port that belongs
to the selected CU group.
The specified port does not
belong to the selected CU
group.
555839505
3ESelect another window. To
set this function, contact the
storage administrator.
This function cannot be used
by the storage partition
administrator.
565249505
XP Remote Web Console Error Codes 361