HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 83 Error Codes — Part Code 9210
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
2EIf this problem persists, call
technical support.
An error occurred during
processing. If this problem
persists, call technical
support.
70609210
3EIf this problem persists, call
technical support.
There is an invalid value in
the Volume Retention
Manager information.
74429210
3EIf this problem persists, call
technical support.
The VTOC information
contains one or more invalid
values.
74439210
5EThe pattern file might be
corrupt. Delete the pattern file
and create a new pattern file.
The pattern file information
contains one or more invalid
values.
74449210
6WMount volumes, and then
retry the operation.
There is no valid volume.81129210
Table 84 Error Codes — Part Code 9211
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5WThe pattern file was obtained
from another RAID device.
Review the pattern file.
The pattern file is not
compatible with the RAID
device.
58009211
5WReview the pattern file.The format of the pattern file
is invalid.
58049211
5WCorrect the pattern file name,
and retry the operation.
You cannot use the following
characters for pattern file
names: " \ / . , : ; * ? < > |
Also, you cannot use
multi-byte characters for
pattern file names.
58059211
5WUse 16 characters or less for
a pattern file name.
The maximum length of a
pattern file name is 16
characters.
58069211
0WTo overwrite the file, select
[OK]. If you do not want to
overwrite the file, select [No].
The specified file already
exists. Do you want to
overwrite this file?
58089211
2EIf this problem persists, call
technical support.
Network error detected.60239211
2EIf this problem persists, call
technical support.
Network error detected.60279211
2WIf this problem persists, call
technical support.
Network error detected.60309211
5WSpecify a directory again.An incorrect directory was
specified.
65259211
5EThe destination directory
might contain a file that has
the same name without
Read/Write attribute. Specify
another directory.
File access error.65269211
XP Remote Web Console Error Codes 359