HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 81 Error Codes — Part Code 9205 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5ESpecify a mainframe Volume.This logical volume is an
open volume.
81219205
5ERetry a little later.This logical volume is busy.81229205
5ECheck the logical volume
configuration, and then retry
the operation.
The logical volume is
configured as a command
device.
81269205
5EThe currently licensed
capacity is insufficient. To
increase the licensed
capacity, buy a new license
key.
The command was rejected,
because the licensed capacity
was exceeded.
81369205
5EConfirm and operate the
volume again.
This logical volume cannot be
selected because it is used as
a volume for XP FlashCopy
Mirror Version 2.
81409205
5ECheck the volume, and then
retry the operation.
This logical volume cannot be
selected because it is used as
a reserve volume for XP Auto
LUN.
81419205
5ECheck the logical volume,
and then retry the operation.
You cannot select this logical
volume because it is used as
a Hitachi Universal Replicator
for z/OS volume.
81429205
5ESelect [Refresh] to acquire
VTOC information from the
storage system.
The VTOC read information
file cannot be read.
555859205
3ESelect another window. To
set this function, contact the
storage administrator.
This function cannot be used
by the storage partition
administrator.
565249205
Table 82 Error Codes — Part Code 9207
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5WThe pattern file is obtained
from another RAID device, or
the format of the pattern file
is invalid. Review the pattern
file.
The pattern file is not
compatible with the RAID
device.
58009207
5EReview the pattern file used.Illegal data is included in the
pattern file used.
58019207
5EReview the pattern file used.The file type is invalid. Select
a file with the extension
“*.gad”.
58029207
5EReview the pattern file used.The size of the pattern file is
invalid.
58039207
5WReview the pattern file used.The format of the pattern file
is invalid.
58049207
XP Remote Web Console Error Codes 357