HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 80 Error Codes — Part Code 9110 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0iTo delete the host, select
[Yes]. Otherwise, select [No].
Are you sure you want to
delete the selected host which
was added by the user?
90829110
0iTo delete the group, select
[Yes]. Otherwise, select [No].
The specified group is
registered in the security
group. Are you sure you want
to delete the group?
90839110
0iTo delete the group, select
[Yes]. Otherwise, select [No].
The specified group includes
some hosts. Are you sure you
want to delete the group?
90849110
0iTo cancel the operation,
select [Yes]. Otherwise, select
[No].
Do you want to cancel?91019110
0iTo apply, select [Yes].
Otherwise, select [No].
Do you want to apply?91029110
0iTo change the group name,
select [Yes]. Otherwise, select
[No].
The specified group is
registered in the security
group. Are you sure you want
to change the name of the
group?
91609110
0iTo set up, select [Yes].
Otherwise, select [No].
Confirm that the channel
path(s) and the device(s)
included in the setting
information are set to offline,
and then select [Yes].
93369110
0WDelete all LDEV groups and
register LDEV groups and
Security groups again.
No volume is registered on
the LDEV group because the
volume configuration has
been changed. Delete all
LDEV groups and register
LDEV groups and Security
groups again.
565389110
Table 81 Error Codes — Part Code 9205
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
50139205
5ESet one more.No commands are issued.50309205
5WReduce the number of set
demands.
The number of issued
commands exceeds the
maximum.
50419205
5WTry the following:
1. Install the program
product.
2. If the program product
cannot be installed, set
Read/Write to all LDEVs.
The program product is not
installed.
55119205
XP Remote Web Console Error Codes 355