HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 80 Error Codes — Part Code 9110 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0WSelect [OK], check the current
settings, and retry the
operation.
The target logical device has
already been defined to
another security group. Also,
the security group contains
the same host in the target
security group.
56189110
0WSelect [OK]. Ensure that the
R-VOL/T-VOL is not set to the
specified security group, and
retry the operation.
The R-VOL/T-VOL cannot be
set to the specified security
group.
56199110
0WSelect [OK], check the
selected volumes, and retry
the operation.
The selected volumes include
some invalid volumes.
56209110
0WSelect [OK], select an item,
and retry the operation.
No item is selected. Select an
item.
56219110
0WSelect [OK], select only one
line, and retry the operation.
To continue this operation,
select only one line.
56229110
0iTo continue processing, select
[OK]. Otherwise, select
[Cancel].
The data has been changed.
If you select another tab
(page), the settings will be
discarded. Are you sure you
want to continue?
56239110
0WCheck the settings, and then
retry.
The host you are registering
is already registered in a host
group to which ports have
already been set.
58169110
0WCheck the settings, and then
retry.
You are registering a host
that is already registered in
another host group. Also, you
are registering the host in a
host group to which ports
have already been set.
58179110
0WCheck the settings, and then
retry.
Ports cannot be set because
a host registered in the
specified host group is
included in another host
group.
58189110
0WCall technical support.An error occurred. If this
problem persists, call
technical support.
70609110
2EIf this problem persists, call
technical support.
An error occurred during
processing. If this problem
persists, call technical
support.
74409110
0WInstall PCBs for the mainframe
computers, and then retry the
operation.
There is no CHIP PCB for
mainframe computers.
81119110
0WMount volumes, and then
retry the operation.
There is no valid volume.81129110
0iTo delete the item, select
[Yes]. Otherwise, select [No].
Are you sure you want to
delete the item?
90819110
354 HP StorageWorks XP Remote Web Console for Storage System Messages and Error Codes