HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 77 Error Codes — Part Code 9010
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0WCheck the device emulation
type or the definition of the
journal volume.
There are no valid volumes.93039010
0WIf you want to apply the
setting, click [Yes]. If not,
click [No].
In the environment where the
host is connected, the
performance of host I/O
might be decreased if the
alias volume is added to
more than one CU at a time.
Addition of the alias volume
for one CU is recommended
Do you want to apply this
setting?
593419010
Table 78 Error Codes — Part Code 9105
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5WSelect [OK], and then install
the program product.
The program product is not
installed.
55119105
0WSelect [OK], correct the
security group settings, and
then retry the operation.
The settings of the security
group are invalid.
56009105
0WSelect [OK], correct the host
group settings, and then retry
the operation.
The settings of the host group
are invalid.
56019105
0WSelect [OK], correct the
length of the letter string, and
then retry the operation.
The length of the letter string
is invalid.
56029105
0WSelect [OK], specify other
hosts, and retry the
operation.
The DKC emulation is
specified as the type of the
host.
56039105
0WSelect [OK], correct the
vendor information, and retry
the operation.
The specified vendor
information is invalid.
56049105
0WSelect [OK], delete
unnecessary hosts, and retry
the operation.
You cannot register any more
hosts.
56059105
0WSelect [OK], delete the
unmounted LDEV, and retry
the operation.
The target LDEV is not
mounted.
56069105
0WSelect [OK], correct the LDEV
group settings, and retry the
operation.
The settings of the LDEV
group are invalid.
56079105
0WSelect [OK], check the
attributes of the specified
volumes, and retry the
operation.
The pool group cannot
include volumes to which LU
paths are defined, or volumes
which are not mounted.
56089105
XP Remote Web Console Error Codes 351