HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 3 Error Codes — Part Code 0003 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
6EThe host is mounted or the
device is reserved. Unmount
the host and cancel
reservation of the device. If
the host is an AIX host,
unmount the host, and
execute the varyoffvg
command.
Processing is disabled
because the host is mounted
or the device is reserved.
20820003
2ECheck the DKC status and the
current status of the
configuration setting. If
necessary, re-execute the
setting operation.
The subsystem status is
invalid. Call technical
support.
20830003
2ECheck the DKC status and the
current status of the
configuration setting. If
necessary, re-execute the
setting operation.
The subsystem status is
invalid. Call technical
support.
20840003
6WWait for a while, and then
retry.
Copying is in progress for XP
Continuous Access, XP
Business Copy, Hitachi
ShadowImage™ z/OS, XP
Auto LUN, Flash Copy
Mirroring Software, or XP
Flex Copy pairs. Wait for a
while, and then retry the
operation.
20850003
6WReset the configuration
definition of XP Continuous
Access, XP Business Copy,
Hitachi ShadowImage™ for
z/OS, XP Auto LUN, XP
FlashCopy Mirror, XP
Snapshot, or XP Flex Copy,
and then retry the operation.
The configuration of XP
Continuous Access, XP
Business Copy, Hitachi
ShadowImage™ for z/OS,
XP Auto LUN, FlashCopy
Mirror, XP Snapshot, or XP
Flex Copy has been defined.
Reset the configuration
definition, and then retry the
operation.
20860003
6WTake the storage system
offline from the host.
The system is online to the
mainframe host. Take the
subsystem offline from the
host.
20870003
6WAdd an alternative path.The XP Continuous Access
pair is suspended. Add an
alternative path.
20880003
6WMake sure that there is an
alternative path from the
MCU.
The corresponding CHIP
might contain the last path
between the MCU and RCU
of XP Continuous Access.
Make sure that there is an
alternative path from the
MCU.
20890003
XP Remote Web Console Error Codes 35