HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 74 Error Codes — Part Code 8510 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0WCheck the settings.A maximum of 256 SSIDs
will be registered except for
the duplicate SSIDs.
590678510
0iCheck the settings.Information from Partition
Definition
590688510
0iCheck the settings of the LUSE
volume in the LUSE window.
If the settings are correct,
select OK and then continue
the operation. If the settings
are incorrect, select Cancel.
The LUSE volume is set across
plural SLPRs. If you perform
this operation, the storage
partition administrator will
become unable to operate.
Do you want to continue this
operation?
590708510
0iCheck the settings.The SSID(s) are associated
with the specified CU. All
SSIDs that are associated
with the CU are to be added
to this SLPR.
591018510
0iCheck the settings.The SSID(s) are associated
with the specified CU. All
SSIDs that are associated
with the CU are to be deleted
from this SLPR.
591028510
0WCheck the settings.SSIDs that are associated
with the selected CU cannot
be added to this SLPR,
because too many SSIDs
have been set in the SLPR.
Delete unnecessary SSIDs
from this SLPR, and then retry
the operation.
591108510
0WCheck the settings.Ports in high-speed mode are
set across multiple SLPRs. If
you perform this operation,
the storage partition
administrator will become
unable to operate. Do you
want to continue this
operation?
591148510
0WCheck the settings.Some SSIDs in the specified
SSID range do not belong to
the selected CU group. SSIDs
except for those that do not
belong to the CU group are
added to the SLPR.
593168510
348 HP StorageWorks XP Remote Web Console for Storage System Messages and Error Codes