HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 74 Error Codes — Part Code 8510 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0WCheck the settings and retry
the operation.
You cannot move the NAS
system LUs (command device,
failure information storage,
FailSafe, and backup data)
to other SLPRs. Change the
setting.
552428510
0WSelect another parity group,
and then retry the operation.
The concatenated parity
group cannot be set across
multiple CLPRs. Select another
parity group, and then retry
the operation.
552618510
0WApply the tentative settings
with no parity groups to the
CLPR that you have created,
and then migrate the parity
group.
The Parity Group cannot be
migrated to the CLPR that you
newly created. Apply the
tentative settings with no
parity groups to the CLPR that
you have created, and then
migrate the parity group.
552628510
0WCheck the settings.Some of the selected parity
groups cannot be migrated
to the other SLPR or CLPR in
the selected CU group.
Change the settings.
555758510
0WMigrate all parity groups in
the CLPR to another CLPR,
and then delete the CLPR.
The CLPR that has some
parity groups cannot be
deleted. Migrate all parity
groups in the CLPR to another
CLPR, and then delete the
CLPR.
556368510
3EIf you selected [Yes], perform
the operation after you set up
a SLPR name and other
changes. If you selected
[No], restart the operation. If
this problem persists, contact
the system management.
The partition configuration
may contain some
inconsistent information.
To initialize partition
configuration, select the Yes
button.
To stop the operation, select
the No button.
570018510
0iCheck the settings of the LUN
paths with the XP LUN
Configuration and Security
Manager Software window.
If the settings are correct,
select OK and then continue
the operation. If the settings
are incorrect, select Cancel.
Some LUs are set across the
multiple SLPRs. If this
operation is performed, the
storage partition
administrator will lose his
function. Do you want to
continue the operation?
590518510
0iCheck the settings of the LUSE
volumes with the Open
Volume Management
window. If the settings are
correct, select OK and then
continue the operation. If the
settings are incorrect, select
Cancel.
Some LUSE volumes are set
across the multiple CLPRs. Do
you want to continue the
operation?
590528510
XP Remote Web Console Error Codes 347