HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 72 Error Codes — Part Code 8505 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5iCheck the XP Cache LUN
Software size and the number
of XP Cache LUN Software
areas.
The configuration cannot be
changed because the
available XP Cache LUN
Software size or the number
of XP Cache LUN Software
areas in the intended CLPR is
insufficient. Check the XP
Cache LUN Software size
and the number of XP Cache
LUN Software areas.
583138505
5iCheck the Partial Cache
Residence size.
The configuration cannot be
changed because the
available Partial Cache
Residence size in the
intended CLPR is insufficient.
Check the Partial Cache
Residence size.
583148505
6WRetry the operation after the
maintenance job is
completed.
If LDEV formatting, LDEV
shredding or Extent
shredding is not operating,
call technical support.
A maintenance job is running
in the subsystem (Correction
Copy, Drive Copy, LDEV
formatting, LDEV shredding,
and Extent shredding.) Retry
the operation after the
maintenance job is
completed.
583158505
5WWait for a while, and then
retry the operation.
Parity groups in CLPR are
being migrated in the
subsystem. Wait for a while,
and then retry the operation.
583168505
5WWait for a while, and then
retry the operation.
CLPR capacity is being
changed in the subsystem.
Wait for a while, and then
retry the operation.
583178505
3EIf this problem persists, call
technical support.
An error occurred on the
DKC, while obtaining
information about the
progress of the CLPR process.
If this problem persists, call
technical support.
583188505
344 HP StorageWorks XP Remote Web Console for Storage System Messages and Error Codes