HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 72 Error Codes — Part Code 8505 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5EChange the settings so that
the port list and the LU in the
parity group are matched,
and retry the operation. If the
same problem persists despite
retrying, call technical
support.
LUN cannot be set across
plural SLPRs.
550318505
5EVerify that the list of parity
groups including LDEVs that
configure the LUSE volume
does not contain incorrect
information. If the same
problem persists despite
retrying, call technical
support.
The LUSE volume cannot be
set across plural SLPRs.
550328505
5EAssign a different port name
(port number), and then retry
the operation. If this problem
persists, call technical
support.
The same port is already
registered in a different SLPR.
550338505
5EInstall the program product.This function is not available.
Disk/Cache Partition is
required to create SLPR or
CLPR.
552288505
6ECheck the selection of the CU
number and change the
settings.
You cannot assign the CU
number to the SLPR across
multiple CU groups.
SLPR No:%s
555778505
6ECheck the selection of the
port and change the settings.
You cannot assign the port to
the SLPR across multiple CU
groups.
SLPR No:%s
555788505
6ECheck the selection of the
SSID and change the settings.
You cannot assign the SSID
to the SLPR across multiple
CU groups.
SLPR No:%s
555798505
6ECheck the selection of the
CLPR and change the
settings.
You cannot assign the CLPR
to the SLPR across multiple
CU groups.
SLPR No:%s
555808505
6ECheck the selection of the
parity group and change the
settings.
You cannot assign the parity
group to the CLPR across
multiple CU groups.
SLPR No:%s
555818505
342 HP StorageWorks XP Remote Web Console for Storage System Messages and Error Codes