HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 72 Error Codes Part Code 8505 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5ESpecify the correct CU
number, and then retry the
operation. If this problem
persists, call technical
support.
The specified CU number is
invalid.
550218505
5ECorrect the CLPR settings,
and then retry the operation.
If this problem persists, call
technical support.
An attempt has been made
to either register newly a
CLPR that is already
registered, or delete a CLPR
that is not registered.
550228505
5ECorrect the SLPR settings, and
then retry the operation. If this
problem persists, call
technical support.
An attempt has been made
to either register newly a
SLPR that is already
registered, or delete a SLPR
that is not registered.
550238505
5ESpecify a different parity
group, and then retry the
operation. If the same
problem persists despite
retrying, call technical
support.
Some parity groups are
already registered in a
different CLPR.
550248505
5ECorrect the settings of parity
group, and retry the
operation. If the same
problem persists despite
retrying, call technical
support.
The incorrect settings of parity
group are contained.
550258505
5ESpecify the correct port name
(port number), and then retry
the operation. If this problem
persists, call technical
support.
The specified port name (port
number) is invalid.
550268505
5ECorrect the settings of the
cache size, and then retry the
operation. If this problem
persists, call technical
support.
The cache size is incorrect.
CLPR No:%s(SLPR No:%s)
550278505
5ESet the cache size to be
equal to or greater than the
required minimum value, and
then retry the operation. If this
problem persists, call
technical support.
The specified cache size is
less than the minimum
required.
CLPR No:%s(SLPR No:%s)
550288505
5ESet the cache size correctly,
and then retry the operation.
If this problem persists, call
technical support.
The total cache size is
incorrect.
550298505
5EChange the settings so that
the CU list and the Parity
Group list are matched, and
retry the operation. If the
same problem persists despite
retrying, call technical
support.
The SLPR that CU belongs to
does not match the SLPR that
LDEV belongs to.
550308505
XP Remote Web Console Error Codes 341