HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 3 Error Codes — Part Code 0003 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
20130003
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
20140003
6EA communication error
occurs. If the same error
occurs despite retrying, call
technical support.
An error occurred while
connecting to the subsystem.
Wait for a while, and then
retry the operation.
20150003
6EWait for a while and reissue
the request.
A service engineer is
accessing the subsystem in
Modify mode. Wait for a
while, and then retry the
operation.
20160003
2ERe-execute the request for
starting exclusive lock.
Network error detected;
exclusive lock was released.
20170003
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
20220003
3ERetry later.Communication busy. Retry
later.
20320003
3EWait for a while, and press
the [Refresh] button.
The SVP is not ready yet, or
an internal processing is
being executed. Wait for a
while, and then select the
[Refresh] button.
20330003
6EWait for a while, and then
retry the operation.
The current XP Cache LUN
Software setting cannot be
changed because the
prestaging operation is in
progress. Wait for a while,
and then retry the operation.
20450003
6EWait for a while, and press
the Refresh button, and then
change the same
configuration again. Or
check the DKC status (if it is
not blocked.) If the same
error occurs, call technical
support.
Prestaging not completed.20800003
6EIf this problem persists, call
technical support.
To perform a VLL operation
on an external volume, check
the status of the path to the
external volume.
An error occurred during a
VLL operation to add or
delete customized volumes.
Wait for a while, and then
retry the operation.
20810003
34 HP StorageWorks XP Remote Web Console for Storage System Messages and Error Codes