HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 65 Error Codes — Part Code 8105 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
2EUse the SVP to check if the
DKC is in the normal status,
and then retry. If the same
problem persists despite
retrying, call technical
support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
20038105
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
20058105
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
20098105
6ECheck if I/O from the host to
target path/volume does not
occur.
The LDEV is used by the
HOST, or an error occurred
in the server procedure.
20108105
6WCheck the status of the disk
storage system. If the volume
is not blocked, call technical
support.
Some of volumes may be
blocked, or there may be a
module in a status that
requires maintenance (for
example, a module is
blocked, the shared memory
is inconsistent, or some other
factor.) Check the status of
the volumes. If the volumes
are not blocked, call
technical support.
20118105
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
20138105
6EA communication error
occurs. If the same error
occurs despite retrying, call
technical support.
An error occurred while
connecting to the subsystem.
Wait for a while, and then
retry the operation.
20158105
6EThe host is mounted or the
device is reserved. Unmount
the host and cancel
reservation of the device. If
the host is an AIX host,
unmount the host, and
execute the varyoffvg
command.
Processing is disabled
because the host is mounted
or the device is reserved.
20828105
2ECheck the DKC status and the
current status of the
configuration setting. If
necessary, re-execute the
setting operation.
The subsystem status is
invalid. Call technical
support.
20838105
2ECheck the DKC status and the
current status of the
configuration setting. If
necessary, re-execute the
setting operation.
The subsystem status is
invalid. Call technical
support.
20848105
XP Remote Web Console Error Codes 329