HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 65 Error Codes — Part Code 8105 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
2ESince the port you are trying
to set is for Fibre Continuous
Access, you need to delete
the logical path, and then set.
Logical paths remain on the
Fibre-MCU port. This
operation may cause a fatal
damage to the logical paths.
Stop this operation. To
continue this operation,
remove the logical paths from
the MCU port first.
13528105
2ESince the port you are trying
to set is for Fibre Continuous
Access, you need to delete
the S-VOL logical path which
is set to RCU Target, and then
set.
S-VOLs remain on the
Fibre-RCU port. This
operation may cause a fatal
damage to S-VOLs. Stop this
operation. To continue this
operation, remove the S-VOLs
from the RCU port first.
13538105
2EThe port you are trying to set
is for Fibre Continuous
Access. You need to change
the attribute when adding a
WWN. Attribute (TarGet or
RCU TarGet)
Failed to add the WWN to
the initiator port.
13548105
2EThe port you are trying to set
is for Fibre Continuous
Access. You need to change
the attribute when adding a
WWN. Attribute (Target or
RCU Target)
The host mode of the host
group connected to the
Initiator port cannot be
changed.
13558105
2EThe port you are trying to set
is for Fibre Continuous
Access. You need to change
the attribute when adding a
host group. Attribute (Target
or RCU Target)
The host group cannot be
added to the Initiator port.
13568105
6EThe specified Port is for Fibre
Continuous Access. Delete a
logical path, and then retry
the operation.
S-VOLs remain on the
Fibre-RCU port. This
operation may cause a fatal
damage to the S-VOLs. Stop
this operation. To continue
this operation, remove the
S-VOLs from the RCU port
first.
13578105
2ECheck the attributes of the XP
Flex Copy volumes, and then
retry the operation.
The LUSE volume cannot be
configured because the XP
Flex Copy volumes do not
have the same I/O
suppression mode and the
same cache mode.
13628105
5WCheck the port type, and then
retry the operation.
The port type is incorrect.13648105
6EInstall the necessary program
product. When an SLPR is
allocated, install a necessary
program product for the
SLPR.
This functionality is not
available. XP LUN
Configuration and Security
Manager Software is
required.
16008105
XP Remote Web Console Error Codes 327