HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 65 Error Codes — Part Code 8105 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
6EThe Configuration information
has been already changed.
Check the settings and
request the setting of the
configuration information
again.
The specified LU path does
not exist.
10258105
6EThe Configuration information
has been already changed.
Check the settings and
request the setting of the
configuration information
again.
The number of volumes you
intend to combine into a
LUSE volume exceeds the
maximum.
10288105
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
10298105
2EReserve volume of XP Auto
LUN or On Demand volume
is included to a volume which
links as an expanded LU. The
error does not occur normally
because it is guarded in the
screen. Contact the program
maker.
An error occurred. If this
problem persists, call
technical support.
10508105
2EYou are trying to perform XP
Secure Manager operation
for non-Fibre port. The error
does not occur normally
because it is guarded in the
screen. Contact the program
maker.
XP LUN Configuration and
Security Manager Software
function (XP Secure Manager)
settings are given to the ports
other than Fibre ports.
Check the setting.
10598105
2EYou are trying to perform XP
Secure Manager operation
for a port where XP Secure
Manager function is invalid.
The error does not occur
normally because it is
guarded in the screen.
Contact the program maker.
An error occurred. If this
problem persists, call
technical support.
10618105
6ECorrect the specified
contents, and request the
setting of the configuration
information again.
The specified WWN is
already in use. Specify
another WWN.
10638105
6WThe Configuration information
has been already changed.
Check the settings and
request the setting of the
configuration information
again.
You are trying to register the
same WWN as the already
registered one. Check the
settings and request the
setting of the configuration
information again.
10648105
6ECorrect the specified
contents, and request the
setting of the configuration
information again.
The specified host name or
the host group name is
already registered. (The host
name and the host group
name cannot be the same.)
10658105
322 HP StorageWorks XP Remote Web Console for Storage System Messages and Error Codes