HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 3 Error Codes — Part Code 0003 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
6ESelect another volume.The specified volume contains
XP Snapshot pairs.
19100003
6ESelect another volume.The specified volume contains
Pool-VOLs.
19110003
6ECorrect the settings, and then
retry the operation.
The specified volume is a
remote command device, and
therefore the command
device setting or the
command device security
setting cannot be set or
released.
19120003
6ECheck the setting.The setting cannot be made
because the specified LDEV
is a remote command device.
19130003
6ECorrect the settings, and then
retry the operation.
The number of V-VOL(s) has
exceeded the maximum
number of V-VOL(s) that can
be set in a subsystem.
19140003
6ECorrect the settings, and then
retry the operation.
The specified LDEV number
is invalid. The LDEV number
of the CU group which is not
set in CHIP cannot be
specified.
19150003
6ECorrect the settings, and then
retry the operation.
You cannot set the volumes
in the same parity group
across multiple CU groups.
19160003
6ECorrect the settings, and then
retry the operation.
The volume(s) in CLPR cannot
be set across multiple CU
groups.
19170003
6WCheck the blocked LDEV and
format the LDEV.
The newly added LDEV has
not been formatted. The LDEV
remains blocked. If you
continue this operation, the
LDEV cannot be referred from
the host. Be sure to format the
LDEV.
19190003
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
20010003
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
20020003
32 HP StorageWorks XP Remote Web Console for Storage System Messages and Error Codes