HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 62 Error Codes — Part Code 7105 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0iThe requested operation
cannot be performed. Check
the status of the specified
volume.
The command has been
rejected because the issued
request is an operation that
cannot be performed with a
volume that can be used from
either the mainframe or
open-system hosts.
580047105
0iStop using the specified pair
for Continuous Access, or
specify a different pair, and
then retry the operation.
The Quick Restore command
has been rejected, because
the specified pair is
composed of internal and
external volumes, and also
used as a Continuous Access
pair.
582597105
0iChange the status of the
Continuous Access pair, and
then retry the operation.
The Reverse Copy or Quick
Restore command has been
rejected, because the S-VOL
is also used as the M-VOL of
a Continuous Access pair
whose status is not Suspend.
582607105
0iChange the status of the
Continuous Access pair, and
then retry the operation.
The Reverse Copy or Quick
Restore command has been
rejected, because the S-VOL
is used as the R-VOL of a
Continuous Access pair
whose status is not Suspend.
582617105
0iAdd sufficient shared memory
to create a pair.
A pair cannot be created
because shared memory for
differential tables is
insufficient.
582627105
5WCheck the requirements for
using the volume with Hitachi
Universal Replicator for
z/OS.
The operation failed because
the specified S-VOL was a
data volume of Hitachi
Universal Replicator for
z/OS. Check the
requirements for using the
volume with Hitachi Universal
Replicator for z/OS.
582997105
5WRelease the Hitachi Universal
Replicator for z/OS setting
or specify another volume.
The operation failed because
the specified T-VOL was a
data volume of Hitachi
Universal Replicator for
z/OS.
583007105
5WRelease the Hitachi Universal
Replicator for z/OS setting
or specify another volume.
The reserve volume setting
failed because the specified
volume was a data volume of
Hitachi Universal Replicator
for z/OS.
583017105
0iStop using the specified pair
for Hitachi Universal
Replicator for z/OS, or
specify a different pair, and
then retry the operation.
The Quick Restore command
has been rejected, because
the specified pair is
composed of internal and
external volumes, and also
used as a Hitachi Universal
Replicator for z/OS pair.
583517105
312 HP StorageWorks XP Remote Web Console for Storage System Messages and Error Codes