HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 62 Error Codes — Part Code 7105 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0WWait for a while, and retry
the operation.
The command has been
rejected, because the
subsystem is busy.
89967105
5WUse the Reverse Resync
option.
Quick Restore cannot be
executed because the
specified pair is composed
of the external volumes with
different cache mode settings.
556457105
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
563017105
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
563027105
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
563037105
3ESelect another window. To
set this function, contact the
storage administrator.
This function cannot be used
by the storage partition
administrator.
565247105
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
571017105
0iSelect a different volume or
release the consistency group
setting.
The command has been
rejected because the cascade
request for creating cascade
pairs composed of volumes
belonging to the same
consistency group was
issued.
580007105
0iWait until the L1 pair status
changes to Split, and then
retry the operation.
The Add Pair command for
adding the L2 pair has been
rejected because the L1 pair
is in V-Split status.
580017105
0iQuick restore operation
cannot be performed when
the pair is composed of a
normal volume and a
customized volume (CV.)
Select a different pair.
The Quick Restore command
has been rejected because
the specified pair is
composed of a normal
volume and a customized
volume (CV.)
580027105
0iTo continue the operation,
delete the Continuous Access
pair.
The command has been
rejected because a
Continuous Access pair exists
in the same subsystem frame.
580037105
XP Remote Web Console Error Codes 311