HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)
Table 62 Error Codes — Part Code 7105 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0iRelease the relationship to
delete the XP FlashCopy
Mirror Version 2 pair, or
specify another volume.
The command has been
rejected, because the
specified T-VOL is being used
as the volume of an XP
FlashCopy Mirror Version 2
pair.
86977105
0iRelease the relationship to
delete the XP FlashCopy
Mirror Version 2 pair, or
specify another volume.
The command has been
rejected, because the
specified volume is being
used as the volume of an XP
FlashCopy Mirror Version 2
pair.
86987105
0iRelease the relationship to
delete the XP FlashCopy
Mirror Version 2 pair.
The Reverse Copy or Quick
Restore command has been
rejected, because the
specified S-VOL is also being
used as the volume of an XP
FlashCopy Mirror Version 2
pair.
86997105
0iWait for Flash Copy
processing of a L1 pair being
finished, and then execute
operation of target Pair.
Because a L1 pair is F-Copy,
you cannot operate to L2.
89207105
0iCorrect the specified CT
Group and retry the
operation again.
The command was rejected
because the specified CT
Group is already used.
89417105
0iInstall the appropriate version
of DKC microcode.
The CT Group operation is
not available because the
target DKC microcode
version does not support the
CT Group operation.
89427105
0iReset the Split time of
Consistency Group from the
mainframe host.
A pair status cannot be
changed because the Split
time of Consistency Group is
set.
89467105
0WWithdraw the XP FlashCopy
Mirror Version 2 relationship.
The command has been
rejected, because the XP
FlashCopy Mirror Version 2
relationship exists.
89917105
0WInstall additional shared
memory.
The command has been
rejected, because sufficient
amount of shared memory is
not installed.
89927105
0WSet the shared memory
extension setting for XP
FlashCopy Mirror Version 2.
The command has been
rejected, because the shared
memory is not set for XP
FlashCopy Mirror Version 2.
89937105
0WWait for a while, and retry
the operation.
The command has been
rejected, because the
subsystem is busy.
89947105
0WWithdraw the XP FlashCopy
Mirror Version 2 relationship.
The command has been
rejected, because the XP
FlashCopy Mirror Version 2
relationship exists.
89957105
310 HP StorageWorks XP Remote Web Console for Storage System Messages and Error Codes