HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 62 Error Codes — Part Code 7105 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0iCheck the contents, and retry.The specified CU number is
invalid.
86317105
0iCall technical support.The timing of issuing the
command is invalid.
86327105
0iCall technical support.The abnormal status is
invalid.
86337105
0iSpecify other volume(s), or
release the XP Auto LUN
setting.
The volume specified as a
reserved volume is already
defined as a reserved volume
for XP Auto LUN.
86347105
0iSpecify other volume(s), or
release the XP Auto LUN
setting.
The specified S-VOL is
defined as a reserved volume
for XP Auto LUN.
86357105
0iSpecify other volume(s), or
release the XP Auto LUN
setting.
The specified T-VOL is
defined as a reserved volume
for XP Auto LUN.
86367105
0iSpecify other volume(s), or
release the XP Auto LUN
setting.
The specified S-VOL is used
as a source volume for XP
Auto LUN.
86377105
0iYou cannot execute the
specified operation. Release
the Cache Residency for
Mainframe setting for the
operation.
The command has been
rejected, because the
specified S-VOL is set for use
in Cache Residency for
Mainframe operations.
86387105
0iYou cannot execute the
specified operation. Release
the Cache Residency for
Mainframe setting for the
operation.
The command has been
rejected, because the
specified T-VOL is set for use
in Cache Residency for
Mainframe operations.
86397105
0iYou cannot execute the
specified operation. Release
the Reverse Copy for the
operation.
The command was rejected,
because a pair sharing the
same S-VOL was in the
Reverse Copy status.
86407105
0iYou cannot execute the
specified operation. Release
the Reverse Copy for the
operation.
The pairs contain a pair in
the Reverse Copy status.
86417105
0iYou cannot execute the
specified operation. Release
the Reverse Copy for the
operation.
The request was rejected,
because the Reverse Copy
request was made to a pair
in the non-Split status.
86437105
0iCheck the pair status.The command has been
rejected, because the pair
status is not Split or Suspend.
86447105
0iYou cannot execute the
specified operation. Release
the Continuous Access pair
for the operation.
The Reverse Copy command
has been rejected, because
the S-VOL is shared as the
M-VOL of a Continuous
Access pair.
86457105
308 HP StorageWorks XP Remote Web Console for Storage System Messages and Error Codes