HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 62 Error Codes — Part Code 7105 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0iCheck the contents, and retry.The specified volume is not
set as a reserved volume.
86097105
0iCheck the corresponding
condition.
The T-VOL is a target volume
for XP Auto LUN.
86107105
0iCheck the contents, and retry.The specified volume is a
T-VOL.
86117105
0iCheck the contents, and retry.The specified volume is not a
T-VOL.
86127105
0iCheck the contents, and retry.The RAID level of the
specified T-VOL is not
supported.
86137105
0iDelete the Continuous Access
pair.
The T-VOL is used as a
Continuous Access M-VOL.
86147105
0iDelete the Continuous Access
pair.
The T-VOL is used as a
Continuous Access R-VOL.
86157105
0iCheck the volume number.The T-VOL is already defined
as an S-VOL.
86187105
0iCheck the corresponding
condition.
The specified T-VOL is
defined as a source volume
for XP Auto LUN.
86197105
0iDelete the Continuous Access
pair.
The volume specified as a
reserved volume is already
defined as a Continuous
Access M-VOL.
86227105
0iDelete the Continuous Access
pair.
The volume specified as a
reserved volume is already
defined as a Continuous
Access R-VOL.
86237105
0iCheck the specified volume
number.
The selected volume is not
paired.
86247105
0iCheck the specified volume
number.
The P-VOL(S-VOL) and
S-VOL(T-VOL) have the same
number.
86257105
0iAfter the high-speed Split is
completed, retry the
operation.
The Simplex command was
rejected, because the
high-speed Split was in
progress.
86267105
0iAfter the high-speed Split is
completed, retry the
operation.
The Reverse Resync command
was rejected, because the
high-speed Split was in
progress.
86277105
0iSelect other pairs.L1 pair Resync instruction
cannot be given because L2
pair is F-Copy status.
86287105
0iCheck the contents, and retry.The status mode specification
is invalid.
86297105
0iCheck the contents, and retry.The status mode type is
invalid.
86307105
XP Remote Web Console Error Codes 307