HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 62 Error Codes — Part Code 7105 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0iCheck the contents, and retry.The specified pair is already
set in another group.
85917105
0iCheck the capacity of the
installed license key. To
create more pairs, purchase
a license key for larger
capacity.
The command was rejected,
because the licensed capacity
was exceeded.
85927105
0iCheck the corresponding
condition.
The S-VOL is a source volume
for XP Auto LUN.
85937105
0iCheck the corresponding
condition.
The S-VOL is a target volume
for XP Auto LUN.
85947105
0iRefresh, and then retry the
operation.
The specified S-VOL does not
exist.
85957105
0iCheck the contents, and retry.The specified volume is a
reserved volume.
85967105
0iYou cannot create pair for
the S-VOL anymore. Delete
the existing pairs.
No more pairs can be
created for the specified
S-VOL.
85977105
0iCheck the contents, and retry.The specified volume is not
an S-VOL.
85987105
0iSpecify other P-VOL, and
retry the operation. Or delete
the pair of the specified
volume, and then retry the
operation.
The specified volume is
already an S-VOL.
85997105
0iCheck the RAID level, and
specify a volume of the
supported RAID level, and
then retry the operation.
The RAID level of the
specified volume is not
supported.
86007105
0iCheck the contents, and retry.The specified S-VOL cannot
be paired with a backup
server volume.
86017105
0iSpecify other volume, and
retry the operation. Or
release the Reserve attribute
of the specified volume, and
then retry the operation.
The volume is already a
reserved volume.
86027105
0iCheck the pair status.The Resync command was
issued to a device in the
simplex status.
86057105
0iDelete the Continuous Access
pair, and then retry the
operation.
Cannot create a new pair
with this volume, because it
is shared as a Continuous
Access pair volume.
86067105
0iChange the status of the
Continuous Access pair, and
then retry the operation.
Cannot change the pair
status, because the status of
the Continuous Access pair
that shares this volume is not
Suspend.
86077105
0iRefresh the screen, and retry
the operation.
The specified T-VOL is not
defined.
86087105
306 HP StorageWorks XP Remote Web Console for Storage System Messages and Error Codes