HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 3 Error Codes — Part Code 0003 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
6ETo register the WWN,
change the attribute of the
specified port to Target or
RCU Target.
You could not register the
WWN to the initiator or
external port.
13540003
6ETo change the host mode,
change the attribute of the
specified port to Target or
RCU Target.
You could not change the
host mode of the host group
that you connected to the
initiator or external port.
13550003
6ETo add the host group,
change the attribute of the
specified port to Target or
RCU Target.
You could not add the host
group to the initiator or
external port.
13560003
6EThe specified Port is for Fibre
XP Continuous Access. Delete
a logical path, and then retry
the operation.
S-VOLs remain on the
Fibre-RCU port. This
operation may cause a fatal
damage to the S-VOLs. Stop
this operation. To continue
this operation, remove the
S-VOLs from the RCU port
first.
13570003
2EDisable the IO Suppression
mode of this volume, and
then retry the operation, or
remove the volume from the
volumes to be set.
XP Cache LUN Software
cannot be set to the specified
volume because the IO
Suppression mode is set to
Enable.
13580003
2EEnable the Cache mode of
this volume, and then retry
the operation, or remove the
volume from the volumes to
be set.
XP Cache LUN Software
cannot be set for this volume
because its Cache mode is
set to Disable.
13590003
2ESpecify a volume that you
can define as a system LU,
and then retry the operation.
An XP Flex Copy volume
cannot be defined as a
system LU.
13600003
2EReduce the number of user LU
settings, and then retry the
operation.
No more user LUs can be set,
because the number of user
LU settings has reached the
maximum.
13610003
2ECheck the attributes of the XP
Flex Copy volumes, and then
retry the operation.
The LUSE volume cannot be
configured because the XP
Flex Copy volumes do not
have the same I/O
suppression mode and the
same cache mode.
13620003
5WCheck the port type, and then
retry the operation.
The port type is incorrect.13640003
2ECheck the settings, and then
retry the operation.
External volumes of different
drive types (Normal, SATA)
cannot be combined to form
a LUSE volume.
13650003
6EWait for a while, and then
retry the operation.
The current XP Cache LUN
Software setting cannot be
changed because the sidefile
size exceeds the threshold.
13660003
30 HP StorageWorks XP Remote Web Console for Storage System Messages and Error Codes