HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 61 Error Codes — Part Code 7010 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0WMultiple volumes cannot be
processed in the operation.
Process one volume at a time.
You cannot select more than
one operation at a time.
51247010
0WSelect the target volume.No target volume is selected.51257010
0WYou cannot create L2 pair for
the specified P-VOL. Delete
the created L2 pair, and retry
the operation.
You cannot create another L2
pair, because the number of
L2 pairs exceeds the
maximum.
51267010
0iSelect the other MU number.The specified MU number is
invalid. Select another MU
number.
51277010
0iYou cannot create L1 pair for
the specified P-VOL. Delete
the created L1 pair, and retry
the operation.
The number of L1 pairs
exceeds the maximum.
65047010
0iYou cannot create L2 pair for
the specified P-VOL. Delete
the created L2 pair, and retry
the operation.
The number of L2 pairs
exceeds the maximum.
65057010
0WCall technical support.Unregistered error code.73107010
0WWait for a while, and retry
the operation. If the same
error occurs despite retrying,
call technical support.
The settings could not be
applied.
73117010
0WCall technical support.The password could not be
acquired.
73127010
0WCall technical support.Error details not available.73137010
2EIf this problem persists call
technical support.
An error occurred during
processing. If this problem
persists, call technical
support.
74407010
4ERetry the operation. If you get
the same message again,
reboot the computer. If
necessary, call technical
support.
A time-out error occurred.80017010
0iCall technical support.Internal logic error.85257010
0iCall technical support.An internal logic
contradiction occurred.
85347010
0ECheck the error code in
Preset Volume list.
Some settings could not be
applied normally. See the
error code.
86587010
5iMount the required PCB, and
then retry the operation.
The PCB required for this
operation is not mounted.
Check the subsystem
configuration.
86597010
0iThe operation was ended
normally. Execute the next
operation.
The request operation has
completed.
90027010
298 HP StorageWorks XP Remote Web Console for Storage System Messages and Error Codes