HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 59 Error Codes — Part Code 7005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5WCheck the volume, and then
retry the operation.
The reserve volume setting
failed because the specified
volume was used by Delta
resync of XP Continuous
Access Journal.
586327005
0WRefresh the XP Business Copy
window, and check the MU
number that can be used.
The operation failed because
the specified MU number was
already used. Specify other
MU numbers.
587117005
Table 60 Error Codes — Part Code 7007
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
60127007
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
71117007
Table 61 Error Codes — Part Code 7010
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0WCheck the capacity of P-VOL
and S-VOL. Specify a volume
with the same capacity, and
retry the operation.
The volume of S-VOL is
different from specified
P-VOL.
51157010
0WYou cannot create L1 pair for
the specified P-VOL. Delete
the created L1 pair, and retry
the operation.
You cannot create another L1
pair, because the number of
L1 pairs exceeds the
maximum.
51167010
0WYou cannot create the
specified pair. Check the
possible number of pairs to
be created.
No MU number is available.51177010
0WSelect MU number.The MU number was not
selected.
51187010
0WSelect P-VOL, and operate.No P-VOL is selected.51197010
0WSelect S-VOL, and operate.No S-VOL is selected.51207010
0WApply the data in the Preset
Volume list. To stop the
transaction, press OK and
continue the operation.
The data has been changed.
If you select another tab
(page), the settings will be
discarded. Are you sure you
want to continue?
51217010
0WGo on to the next operation.No data has been changed.51227010
0WCheck the password.The password is invalid.51237010
XP Remote Web Console Error Codes 297