HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 59 Error Codes — Part Code 7005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0iCheck the contents, and retry.An invalid secondary SSID is
specified for the Paircreate or
Pairresync command.
86557005
0iCheck the contents, and retry.The secondary SSID specified
for the pairsplit-S or pairsplit
command is invalid.
86567005
0iCheck the setting you
specified in Option tab.
The Swap&Freeze option
cannot be specified, because
the mode is invalid.
86577005
0iMatch the number of volumes
composing the LUSE volume
you intend to specify as the
P-VOL and the number of
volumes composing the LUSE
volume you intend to specify
as the S-VOL, and then retry
the operation.
The number of volumes
composing the LUSE volume
specified as the P-VOL does
not match the number of
volumes composing the LUSE
volume specified as the
S-VOL.
86707005
0iCorrect the MU number, and
then retry the operation.
The specified MU number is
not less than or equal to 2.
86957005
0iWait until L1 pair becomes
PSUS status, and execute the
operation to L2 pair.
Because a L1 pair is not
PSUS, you cannot operate to
L2.
89207005
0iYou cannot create a pair
using these volumes.
To create a pair by using a
volume without VMA, you
need to only use volumes
without VMA. To create a
pair by using a volume with
VMA, you need to only use
volumes with VMA.
The command was rejected,
because you tried to create
a volume pair formed with a
volume to which VMA is set
by XP LUN Security Extension
Software and a volume
without VMA.
552647005
6EIncrease the licensed
capacity of XP LUN Security
Extension Software, and retry
the operation.
You cannot create the pair,
because the licensed capacity
of XP LUN Security Extension
Software is insufficient.
553017005
5WUse the Reverse Resync
option.
Quick Restore cannot be
executed because the
specified pair is composed
of the external volumes with
different cache mode settings.
556457005
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
563017005
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
563027005
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
563037005
292 HP StorageWorks XP Remote Web Console for Storage System Messages and Error Codes