HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 59 Error Codes — Part Code 7005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0iYou cannot execute the
specified operation. Release
the Reverse Copy for the
operation.
The L1 pairs contain a pair
in the Reverse Copy status.
86417005
0iYou cannot execute the
specified operation. Release
the Reverse Copy for the
operation.
The L2 pairs contain a pair
in the Reverse Copy status.
86427005
0iYou cannot execute the
specified operation. Release
the Reverse Copy for the
operation.
The request was rejected,
because the Reverse Copy
request was made to a pair
in the non-Split status.
86437005
0iCheck the pair status.The command has been
rejected, because the pair
status is not PSUS or PSUE.
86447005
0iYou cannot execute the
specified operation. Release
the Continuous Access pair
for the operation.
The Reverse Copy command
has been rejected, because
the P-VOL is shared as the
S-VOL of a Continuous
Access pair.
86457005
0iDelete the Continuous Access
pair.
The Reverse Copy request
was rejected, because the
P-VOL was shared with a
Continuous Access pair in the
non-suspend status.
86467005
0iDelete the Continuous Access
pair.
The Reverse Copy command
has been rejected, because
the S-VOL is shared as the
S-VOL of a Continuous
Access pair.
86477005
0iCheck the specified volume
number.
The boot device and the
P-VOL do not match in the
Paircreate command.
86487005
0iCheck the specified volume
number.
Because the boot device is
the S-VOL in the Pairsplit-S
command, the flag does not
match.
86497005
0iCheck the target volume
number.
The boot device and the
P-VOL do not match in the
Paircreate, Pairresync, or
Pairsplit-S command.
86507005
0iCheck the contents, and retry.The SSID is invalid.86517005
0iCheck the target volume
number.
The boot device is not a
P-VOL nor S-VOL.
86527005
0iCheck the target volume
number.
Because the boot device is
the P-VOL in the Pairsplit-S
command, the flag does not
match.
86537005
0iCheck the target volume
number.
Boot device and S-VOL do
not match in Paircreate,
Pairresync, or Pairsplit-S
instructions.
86547005
XP Remote Web Console Error Codes 291