HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 59 Error Codes — Part Code 7005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0iAfter the high-speed Split is
completed, retry the
operation.
The SMPL command was
rejected, because the
high-speed Split was in
progress.
86267005
0iAfter the high-speed Split is
completed, retry the
operation.
The Reverse Resync command
was rejected, because the
high-speed Split was in
progress.
86277005
0iAfter changing the status of
L2 pair to PSUS, execute the
Resync command of L1 pair.
L1 pair Resync instruction
cannot be given because L2
pair is COPY(SP) status.
86287005
0iCheck the contents, and retry.The status mode specification
is invalid.
86297005
0iCheck the contents, and retry.The status mode type is
invalid.
86307005
0iCheck the contents, and retry.The specified CU number is
invalid.
86317005
0iCall technical support.The timing of issuing the
command is invalid.
86327005
0iCall technical support.The abnormal status is
invalid.
86337005
0iSpecify other volume(s), or
release the XP Auto LUN
Setting.
The volume specified as a
reserved volume is already
defined as a reserved volume
for XP Auto LUN.
86347005
0iSpecify other volume(s), or
release the XP Auto LUN
Setting.
The specified P-VOL is
defined as a reserved volume
for XP Auto LUN.
86357005
0iSpecify other volume(s), or
release the XP Auto LUN
Setting.
The specified S-VOL is
defined as a reserved volume
for XP Auto LUN.
86367005
0iSpecify other volume(s), or
release the XP Auto LUN
Setting.
The specified P-VOL is used
as a source volume for XP
Auto LUN.
86377005
0iYou cannot execute the
specified operation. Release
the Cache Residency setting
for the operation.
The command has been
rejected, because the
specified P-VOL is set for use
in Cache Residency
operations.
86387005
0iYou cannot execute the
specified operation. Release
the Cache Residency setting
for the operation.
The command has been
rejected, because the
specified S-VOL is set for use
in Cache Residency
operations.
86397005
0iYou cannot execute the
specified operation. Release
the Reverse Copy for the
operation.
The command was rejected,
because a pair sharing the
same P-VOL was in the
Reverse Copy status.
86407005
290 HP StorageWorks XP Remote Web Console for Storage System Messages and Error Codes