HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 58 Error Codes — Part Code 6810 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0WTo delete the specified line of
settings from the Preset list,
select [OK]. Otherwise, select
[Cancel].
Do you want to delete the
specified line of settings from
the Preset list?
91116810
0iCorrect the setting, and then
retry. If the same problem
persists despite retrying, call
technical support.
The options Block Option and
Do not Block (Volume Level)
cannot be specified at the
same time.
552126810
0iCorrect the setting, and then
retry. If the same problem
persists despite retrying, call
technical support.
The Level 2 Threshold setting
is incorrect.
552146810
0iCorrect the setting, and then
retry. If the same problem
persists despite retrying, call
technical support.
The Sleep Time setting is
incorrect.
552196810
0iTo continue processing, select
[OK]. To stop processing,
select [Cancel].
This function will apply the
setting to all the target CLPRs.
This function will overwrite
the setting on a CLPR if the
setting is already applied to
the CLPR. Are you sure you
want to continue this
operation?
590466810
0iTo continue processing, select
[OK]. To stop processing,
select [Cancel].
Depending on settings, these
pairs may become suspended
if an XP Continuous Access
Asynchronous Software pair,
a TrueCopy Asynchronous for
Mainframe pair, or a CC
pair exists. Are you sure you
want to continue this
operation?
590476810
Table 59 Error Codes — Part Code 7005
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists call technical support.
50137005
2EIf this problem persists, call
technical support.
An error occurred during SVP
processing. If this problem
persists, call technical
support.
50997005
0iSelect the OK button.The specified volume cannot
be set because the volume(s)
is used as a system volume of
the NAS.
56247005
0iSelect the OK button.You cannot create another
pair, because the number of
pairs in the group exceeds
the maximum.
56257005
XP Remote Web Console Error Codes 281