HP StorageWorks XP Remote Web Console Error Codes: HP XP12000 Disk Array, HP XP10000 Disk Array, HP 200 Storage Virtualization System (AE002-96057, May 2011)

Table 3 Error Codes — Part Code 0003 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
6EThe Configuration information
has been already changed.
Check the settings and
request the setting of the
configuration information
again.
In the linkage operation
including LUSE, the path is
specified to other than the
top.
11860003
6EThe Configuration information
has been already changed.
Check the settings and
request the setting of the
configuration information
again.
You cannot expand the LU
because the host mode of the
group with paths which are
defined in the LU is
corresponding to online
LUSE.
11870003
2EIf this problem persists call
technical support.
An error occurred. If this
problem persists call technical
support.
11880003
6EDelete a file system
configured on the user LU,
and then retry.
Failed to delete the specified
user LU because it is being
used by the NAS package.
To delete the specified user
LU, delete the file system
configured on the LU that is
set by this user LU.
11890003
6ECorrect settings and then
retry.
To define a path to the
volume from a NAS port or
an iSCSI port, the volume
must be read/write-enabled
and also usable as an S-VOL
(secondary volume.)
11900003
6ECorrect the settings, and then
retry.
When a path is defined from
an iSCSI port to a volume,
the volume cannot be
configured as a command
device. Also, paths cannot be
defined from iSCSI ports to
command devices.
11920003
6ECorrect the settings, and then
retry.
You cannot add paths to XP
Continuous Access/XP
Business Copy/XP Flex Copy
pair volumes.
11930003
6ECorrect the settings, and then
retry.
No information can be
changed about this external
port because the port has an
external volume.
11940003
6ECorrect the settings, and then
retry.
The specified volume(s) are
used as a command device.
11950003
6ECorrect the settings, and then
retry.
You cannot create a LUSE
volume by concatenating LUs
and XP Flex Copy LUs.
11960003
6ECorrect the settings, and then
retry.
You cannot set high-speed
mode to a package including
an external port.
11970003
28 HP StorageWorks XP Remote Web Console for Storage System Messages and Error Codes